Nomex Needle Punched Felt Good Compacting Performance 200℃ ~ 250℃
Compacting felts main componets are 100%nomex(aramid) in surface,with very heavy needle to guarentee the flexible and smooth non-marking surface, to offer maximumshrinkage and dimensional stability .
| Advantages: | Parameter: |
| Even and smooth felt surface, stable dimension, no deformation | Maximum Width: 3500mm |
| With aramide surface appropriate for high working temperature | Minimum Length: 1250mm |
| Very good compacting performance. | Maximum Weight: 15800g/m2 |
| Excellent performance to improve hand feeling on knitting fabric | Maximum Thickness: 22mm |
| Stable running, no off-tracking | Operation Temperature: 200℃ ~ 250℃ |
Product:
| Model | Material | Max Temp | Thickness |
| SCF-001 | Nomex/Polyester/Wool | 220℃ | 18-22mm |
| SCF-002 | Nomex/polyester | 220℃ | 18-22mm |
| SCF-003 | Nomex/Wool | 220℃ | 18-22mm |
| SCF-004 | Nomex | 250℃ | 18-22mm |
Application:
Apply to various kinds of European (FERRARO,LAFER,CIBITEX,SANTEX) and Chinese Sanforizing finishing machines for knitting fabrics.
Tracking Compacting felts
Please triple check the following:
That all rolls have been reinstalled, correctly pinned or bolted, turn freely, and are parallel to the heated cylinder.
That the pistons used to engage the tracking roll are properly working.
That the feeler gauges or tracking sensors are working properly.
That the felt is not too wide, thereby hanging over the cylinder(s) edge(s).
That there is enough heat in the main cylinder to create sufficient friction such that the felt holds to the heated cylinder as opposed to slipping against a cold cylinder (352° C / 200° F).
NOTE: We highly recommend that you take a few moments before installing a felt to measure the length (see diagram below). Please compare your figures to ours provided on the Certificate Of Analysis enclosed with the packing slip. Should a discrepancy exist, please call before installing.
Product Tags:
|
|
Nomex Needle Punched Felt Compacting Felt Performance 200℃ ~ 250℃ Images
|
